Go back to previous topic
Forum nameCalfishing.com Main Board
Topic subjectShimano Curado CU200 Drag\Lock Problem
Topic URLhttp://www.calfishing.com/dc/dcboard.php?az=show_topic&forum=2&topic_id=5387
5387, Shimano Curado CU200 Drag\Lock Problem
Posted by jaspil, Sun Jan-05-14 02:50 PM
HELP
After casting and rotating the real in handle the reel does not lock, I can pull the line out at will. I have taken the reel apart almost totally and found no problem or broken parts
ANY IDEAS?
By the way I used the post on this site to tear down the reel thanks for whoever posted those outstanding pictures and instructions.
Thanks
5388, RE: Shimano Curado CU200 Drag\Lock Problem
Posted by BASSCAT, Tue Jan-07-14 01:12 PM

Check to see that you have the two springs in place that engage /disengage the reel that it sit atop the plastic piece with the pinion gear.

What about the handle ? Does it turn in both directions ?

Go to Shimanos website and view schematic...!
5389, RE: Shimano Curado CU200 Drag\Lock Problem
Posted by jaspil, Tue Jan-07-14 01:31 PM
Springs are there and handle wll rotate both ways since posting I went to the shimano site and read they will repair the reel for 25 bucks. Heck that is a good deal I thought. I just dropped it off at the post office for 9 bucks. I will post the outcome when I find out. They said turn around is about 19 days. Thanks for the reply. I fish salt ay San Antonio Bay in Seadrift Texas
5390, RE: Shimano Curado CU200 Drag\Lock Problem
Posted by BASSCAT, Tue Jan-07-14 02:45 PM
Handle moves both ways..anti reverse pawl under main gear / drag stack could be missing or too much grease.