Go back to previous topic | Forum name | Tackle and Boats | Topic subject | Hardware changing on Plugs | Topic URL | http://www.calfishing.com/dc/dcboard.php?az=show_topic&forum=12&topic_id=3377 |
3377, Hardware changing on Plugs Posted by niKKo, Thu Feb-28-08 03:41 PM
Hi guys, I recently bought a couple plugs off ebay. I was lured in by the paint jobs and sizes everything said "quality" even the eyes look awesome and huge. And I saw a video of them swimming, so I bought a couple. As you can see the eye screws that hold the 2 hooks and the line tie eye screw are so small. I was just changing out the split rings and noticed how easy it was to remove one of the eye screws, came out way to easy. So I want to know if there will be any problem if I replace them with bigger screw eyes. And what type of screw eyes should I look for? If I change them myself should I add any type of adhesive to the screw? Or should I just contact the makers? In the pic with the 2 plugs the one with the big screw eye is from a different maker, its just there as an example. Thanks Guys!!
http://www.calfishing.com/dc/user_files/6581-screw_eye_(Medium).jpg
http://www.calfishing.com/dc/user_files/6582-Millionaire_008_(Medium).jpg
|
3378, RE: Hardware changing on Plugs Posted by magmaster, Thu Feb-28-08 04:45 PM
I can just recommend that you use Stainless hardware. You can find them on sites like this one: www.barlowstackle.com
Use Owner Hyperwire split rings too. They are the best out there.
|
3379, RE: Hardware changing on Plugs Posted by niKKo, Thu Feb-28-08 08:19 PM
Thanks Magmaster....i just ran out of Hypers but i have some spros power split rings. You think I can go to a store like Home Depot and find the stainless screw eyes?
|
3380, RE: Hardware changing on Plugs Posted by kpn, Fri Feb-29-08 08:24 PM
>Thanks Magmaster....i just ran out of Hypers but i have some >spros power split rings. You think I can go to a store like >Home Depot and find the stainless screw eyes?
Nicco, One of the lure in the first picture is called KPN lure correct? I'm the maker of that lure. I bought the ss hardware from the site mention above and from Staminainc.com. I have some of them, if you want, let me know I will let you have them the same $ as I got from them. No! You can not find screw eyes at Home Depot, they carried ss hardware, but NOT what you need (believe me, I went through that already). To me, the size of the screw is not inportant, as long as your screw is long enough.
KPN.
|
3381, RE: Hardware changing on Plugs Posted by niKKo, Sat Mar-01-08 12:41 PM
>>Thanks Magmaster....i just ran out of Hypers but i have >some >>spros power split rings. You think I can go to a store like >>Home Depot and find the stainless screw eyes? > > >Nicco, >One of the lure in the first picture is called KPN lure >correct? I'm the maker of that lure. I bought the ss hardware >from the site mention above and from Staminainc.com. I have >some of them, if you want, let me know I will let you have >them the same $ as I got from them. >No! You can not find screw eyes at Home Depot, they carried ss >hardware, but NOT what you need (believe me, I went through >that already). >To me, the size of the screw is not inportant, as long as your >screw is long enough. > >KPN.
thats your plug alright, Kahn. On a side note I think you should get your plugs up in the review section here. They are really nice plugs with internal rattles. And I know there have been some good catches on Stripers. Kahn the plug is a 6" and the screw eyes are a total length of 5/8 with 1/4 of thread, sounds to short, you think?
I have another plug from the same maker it is 71/2 and the screw eye are a total length of 3/4 with 3/8 of thread, how does that sound?
If you have something that will be better let me know, okay? thanks
|
3383, RE: Hardware changing on Plugs Posted by kpn, Sun Mar-02-08 01:14 PM
>>>Thanks Magmaster....i just ran out of Hypers but i have >>some >>>spros power split rings. You think I can go to a store like >>>Home Depot and find the stainless screw eyes? >> >> >>Nicco, >>One of the lure in the first picture is called KPN lure >>correct? I'm the maker of that lure. I bought the ss >hardware >>from the site mention above and from Staminainc.com. I have >>some of them, if you want, let me know I will let you have >>them the same $ as I got from them. >>No! You can not find screw eyes at Home Depot, they carried >ss >>hardware, but NOT what you need (believe me, I went through >>that already). >>To me, the size of the screw is not inportant, as long as >your >>screw is long enough. >> >>KPN. > >thats your plug alright, Kahn. >On a side note I think you should get your plugs up in the >review section here. They are really nice plugs with internal >rattles. And I know there have been some good catches on >Stripers. >Kahn the plug is a 6" and the screw eyes are a total length of >5/8 with 1/4 of thread, sounds to short, you think? > >I have another plug from the same maker it is 71/2 and the >screw eye are a total length of 3/4 with 3/8 of thread, how >does that sound? > >If you have something that will be better let me know, okay? >thanks >
Nicco, I think 5/8" screw for the 6" plug and 3/4" for 7 1/2" is too short. I used 1 1/8" to 1 1/2" for my plugs and I also used liquid nail when I applying the screws. I have 1 1/8" & 1 1/2" SS screw and I can help you to fix the plugs you have. I don't know how to get the plugs to the review section....(to whom & where). I would appriciated your input.
Check your PM.
Khanh aka KPN.
|
3384, RE: Hardware changing on Plugs Posted by niKKo, Mon Mar-03-08 09:58 AM
thanks for the help Kahn, I sent you a pm!
| |